MakerGeeks.com Get Started 3D Printing Kit for building a RepRap or other 3D printer, or upgrade the printer's current configuration to a better one. We sell a lot of 3D Printer kits where we print all the plastic parts for you... and while we don't sell a full blown kit we do offer the MakerGeeks.com Get Started 3D Printing Kit which will take ANY 3D Printer about 95% of the way to completion.

Getting Started 3D Printing is as easy as 1... 2... 3 with MakerGeeks.com:

1. Pick out the 3D Printer you want to build and then order the plastic parts here 3D Printer Kits & Plastic Parts
2. Order this item (the MakerGeeks.com Get Started 3D Printing Kit)
3. Sit back and relax... we'll start working on your kit in the color you request and in 7-10 business days or less you'll be getting started on this awesome adventure of 3D Printing!!

MakerGeeks.com Get Started 3D Printing Kit will finish up any of these 3D Printer Printed Plastics Only Kits we sell right here on MakerGeeks.com:

• Mini Kossel
• Rostock
• Mendel90
• Mendel Max 1.5
• Mendel Max 2.0
• Prusa Mendel
• ... OR... ANY other RepRap, or home-brew DIY based 3D Printer Kit design

Each MakerGeeks.com Get Started 3D Printing Kit includes (updated list on 05/03/2014):

• 1 x Complete soldered RAMPS 1.4
  
• 1 x JHEAD Hotend with Thermal Core & 100k Thermistor Installed and ready
  
• 5 x A4988 Complete soldered driver with additional CLK trim-pot
  
• 1 x Arduino Mega 2560
• 2 x Z Axis Couplers 2 Pack - a 3D Printer must have!!
  
• 1 x 40mm Cooler Fan - to use on your Hotend and keep those prints working great!!
  
• 5 x stepper motors - High Torque Hybrid Nema17 - with extra long molex connector wires
  
• 15x 70cm cable set for 3D Printers (including 5 x 2-pin,5 x 3-pin,5 x 4-pin)
  
• 2 x EPCOS 100k thermistor with extra long wires
  
• 1 x RepRap Aluminum Build Plate ( 220mm x 220mm x 3.2mm )
  
• 1 x Borosilicate Glass for 3D Printers (213mm x 200mm x 3mm )
  
• 1 x Smart-LCD w/ SD Card Reader + breakout board and EZ Connect for the RAMPS Board
  
• 1 x Heatbed PCB MK1 (214mmx 214mm)
• 1 x 480W 120mm Silent ATX Power Supply
• 4 x 608zz VXB Bearings
• 10 x LM8UU - Linear Ball Bearings
• 1 x M8 Hobbed Bolt with washers and nuts
• 2 x GT2 Pulleys - reduced backlash and much high printing resolution
• 2 x 1220mm GT2 Belts - reduced backlash and much high printing resolution
• 3 x Mechanical Endstop Switch - with extra long hook-up wires

Here is what is still required on your end to source out, most of these items can be found at your local hardware store, these are also the heavier and/or larger items so it's expensive to ship and hard to package properly plus its much easier to go to Lowes or your local hardware store and pick these up!!

1. Plywood, Metal, Acrylic or other material for the base and/or frame (Lowes or a Hardware Store)
2. All the nuts/ bolts you'll need (Lowes or a Hardware Store)

We hope this will help you get your 3D Printer finished up and printing off those awesome designs... drop us a line and let me know what you are working on!! Have a great day!!