Ah, we have all be there... (and if you haven't yet; you will!!) our hotend is clogged and you get that "clicking" sound of your extruder drive wheel not pushing the filament though anymore. A lot of times this can be solved by using our 3D Printer Nozzle Tip Cleaning Tool (sold here: http://www.makergeeks.com/3dprnotipclt.html) but this tool only really reaches the "nozzle" portion of the hotend which is great for keeping your nozzle clean and clear between filament changes.

We also make a full 3D Printer Nozzle Cleaning kit which you can order - (sold here: http://www.makergeeks.com/noclkit.html) If you have a serious clog then you need some Extruder Floss - extruder floss is very thin (0.305mm) carbon steel wire that is about 12" long that you can use to insert into the top of the hotend and press through the nozzle while the unit is at tempature and then littearly floss the hotend until you remove the blockage.

It's a simple yet effective tool to have and to keep right next to your 3D printer... it makes an afternoon of tinkering to try and fix a problem into a 5min job and you'll be back up and running.

Order both the 3D Printer Nozzle Tip Cleaning Tool and MakerGeeks Extruder Floss today; the Tip cleaner will keep your nozzle clean and clear in-between filament changes and the Extruder Floss will  help when those clogs threaten to clog up your work (or play) flow. Order today!